ATSAM3X4CA-CU
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | SAM3X |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 84MHz |
| Base Part Number | ATSAM3X |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 63 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of DAC Channels | 2 |
| Height Seated (Max) | 1.1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3X4CA-CU Overview
To save space, it is included in the 100-TFBGA package. Surface Mount is the way to mount it. It comes in the package?of a Tray. There is a ARM? Cortex?-M3 as core processor in this device. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 63 I/Os on it. To find equivalent components, use its ATSAM3X base part number. A BOTTOM position is assigned to its terminals. 100 terminationals are present. Part of the SAM3X series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 1.8V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 100 pins are used. It belongs to the subcategory Microcontrollers. The devices have a maximum memory size of 256kB that can be used to store programs and data. The architecture of its core is ARM. Using a frequency of 84MHz, it is very efficient. Using 3.6V's adaptability as a supply voltage allows designers to maximize its use. It appears that there are 3 timers/counters in use. The oscillator type Internal is used to operate the device.
ATSAM3X4CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3X4CA-CU Applications
There are a lot of Microchip Technology ATSAM3X4CA-CU Microcontroller applications.
- Washing machine
- Gas monitoring systems
- Hard drives
- Coffee machines
- Magnetic resonance imaging (MRI)
- Volt meter
- Binding machines
- Microwave ovens
- Routers
- Embedded gateways