ATMEGA644V-10PU
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Manufacturer Package Identifier | ATMEGA644V-10PU |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA644 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 0.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 4.826mm |
| Length | 52.58mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA644V-10PU Overview
There is an option to purchase it in the 40-DIP (0.600, 15.24mm) package, which saves space. In this case, it is mounted using the method of Through Hole. Tube is the package that contains it. The device has a AVR core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 32 I/Os on the board. A component with the same part number as ATMEGA644 can be compared to other similar components. DUAL is the location of its terminals. A 40 termination is contained within it. The AVR? ATmega series contains this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. For its construction, 40 pins are used. A method of mounting is used, which is Through Hole. It belongs to the subcategory Microcontrollers. In order to store data and programs, the devices have a memory size of 64kB. In this case, 0.5mA represents the maximum current supply. A 2/5V source of power is being used to run it. It performs extremely well at a frequency of 10MHz. 3 timer/counters are present. Vsup should be kept above 2.7V for normal operation. It works with an oscillator type Internal.
ATMEGA644V-10PU Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA644V-10PU Applications
There are a lot of Microchip Technology ATMEGA644V-10PU Microcontroller applications.
- Computer/laptop
- Dryers
- Electrocardiogram (EKG)
- Aerospace navigation systems
- Fax machines
- 3D printers
- Process control devices
- Broadband technology, video and voice processing
- Equipment control
- Glucose monitoring systems (for Type 1 Diabetes)