ATF1508RE-5AX100
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Supplier Device Package | 100-TQFP (14x14) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 400MHz |
| Base Part Number | ATF1508RE |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 450μA |
| Number of I/O | 80 |
| Nominal Supply Current | 450μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Number of Macro Cells | 128 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| RoHS Status | ROHS3 Compliant |
ATF1508RE-5AX100 Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with 100-TQFP.The device is programmed with 80 I/Os.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the ATF15xx series.In accordance with the [0], its related parts are listed.If high efficiency is desired, the supply voltage should be kept at [0].It is adopted to store data in [0].This device is mounted by Surface Mount.A total of 100pins are provided on this board.There is a maximum supply voltage of 3.6Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 3VV.A total of 100 Programmable I/Os are available.There can be 400MHz frequency achieved.400MHzis the maximum frequency.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.The program consists of 8 logic blocks (LABs).A fundamental building block of logic consists of 8logic elements/cells.
ATF1508RE-5AX100 Features
100-TQFP package
80 I/Os
The operating temperature of 0°C~70°C TA
100 pins
8 logic blocks (LABs)
ATF1508RE-5AX100 Applications
There are a lot of Microchip Technology ATF1508RE-5AX100 CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Wide Vin Industrial low power SMPS
- Dedicated input registers
- STANDARD SERIAL INTERFACE UART
- Pattern recognition
- State machine control
- Handheld digital devices
- I2C BUS INTERFACE
- TIMERS/COUNTERS
- PLC analog input modules