ATF1508ASL-25AI100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 25 ns |
| Frequency (Max) | 33.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3000 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 25 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1508ASL-25AI100 Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.TQFPis the package in which it resides.It is equipped with 80I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5Vprovides power to the device.It is a part of family [0].There are 100 pins on the chip.In digital circuits, there are 3000gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.There are 100pins on it.A voltage of 5.5V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 80 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the operating temperature be higher than -40°C.There should be a temperature below 85°Cat the time of operation.The program consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type is classified as EE PLD.
ATF1508ASL-25AI100 Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
ATF1508ASL-25AI100 Applications
There are a lot of Atmel (Microchip Technology) ATF1508ASL-25AI100 CPLDs applications.
- Power Meter SMPS
- Code converters
- White goods (Washing, Cold, Aircon ,...)
- High speed graphics processing
- Power up sequencing
- I/O expansion
- Programmable power management
- Wide Vin Industrial low power SMPS
- Complex programmable logic devices
- USB Bus