ATF1508AS-10QC100
| Parameters | |
|---|---|
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3000 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
ATF1508AS-10QC100 Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a PQFP package.The device is programmed with 80 I/O ports.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.Power is supplied by a voltage of 5V volts.It is a part of family [0].It is programmed with 100 pins.A digital circuit is built using 3000gates.In order to store data, EEPROMis used.It is mounted by Surface Mount.This board has 100 pins.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for this device to operate.The system runs on a power supply of 3.3/55V watts.A programmable I/O count of 80 has been recorded.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 70°C.Its basic building block is composed of 8 logic blocks (LABs).The maximum frequency should not exceed 125MHz.A programmable logic type can be categorized as EE PLD.
ATF1508AS-10QC100 Features
PQFP package
80 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)
ATF1508AS-10QC100 Applications
There are a lot of Atmel (Microchip Technology) ATF1508AS-10QC100 CPLDs applications.
- Programmable power management
- D/T registers and latches
- Cross-Matrix Switch
- Digital systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Protection relays
- Storage Cards and Storage Racks
- I/O PORTS (MCU MODULE)
- TIMERS/COUNTERS
- Power Meter SMPS