ATF1504AS-10AC100
| Parameters | |
|---|---|
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1500 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
ATF1504AS-10AC100 Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].As you can see, this device has 64 I/O ports programmed into it.100terminations are programmed into the device.Its terminal position is QUAD.Power is supplied by a voltage of 5V volts.It is included in Programmable Logic Devices.It is equipped with 100 pin count.In digital circuits, there are 1500gates, which act as a basic building block.If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.This electronic part is mounted in the way of Surface Mount.The pins are [0].A maximum voltage of 5.25Vis required for operation.It operates with the minimal supply voltage of 4.75V.The frequency that can be achieved is 125MHz.It is recommended that the operating temperature exceed 0°C.It is recommended that the operating temperature be lower than 70°C.4logic blocks (LABs) make up this circuit.There should be a lower maximum frequency than 125MHz.A programmable logic type is classified as EE PLD.
ATF1504AS-10AC100 Features
TQFP package
64 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
ATF1504AS-10AC100 Applications
There are a lot of Atmel (Microchip Technology) ATF1504AS-10AC100 CPLDs applications.
- ROM patching
- Preset swapping
- Portable digital devices
- Random logic replacement
- TIMERS/COUNTERS
- Cross-Matrix Switch
- PULSE WIDTH MODULATION (PWM)
- Programmable power management
- Handheld digital devices
- D/T registers and latches