ATF1502ASV-20JC44
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Frequency (Max) | 83.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1502ASV-20JC44 Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a J package.The device has 32inputs and outputs.Devices are programmed with terminations of [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is programmed with 44 pins.If you use this device, you will also find [0].As a building block for digital circuits, there are 750gates.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].Surface Mountis used to mount this electronic component.A total of 44pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Normally, it operates with a voltage of 3VV as its minimum supply voltage.This device runs on 3Vvolts of electricity.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 70°C.It is recommended that the maximum frequency be less than 83.3MHz.A programmable logic type is categorized as EE PLD.
ATF1502ASV-20JC44 Features
J package
32 I/Os
44 pin count
44 pins
3V power supplies
ATF1502ASV-20JC44 Applications
There are a lot of Atmel (Microchip Technology) ATF1502ASV-20JC44 CPLDs applications.
- State machine design
- PLC analog input modules
- Complex programmable logic devices
- INTERRUPT SYSTEM
- Dedicated input registers
- TIMERS/COUNTERS
- ToR/Aggregation/Core Switch and Router
- DMA control
- Software Configuration of Add-In Boards
- POWER-SAVING MODES