ATF1502AS-7JC44
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.35V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 32 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Programmable Logic Type | EE PLD |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.572mm |
| Length | 16.586mm |
| Width | 16.586mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1502AS-7JC44 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the Jpackage, you will find it.It is programmed with 32 I/Os.There are 44 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.There are 44pins on the chip.This device is also capable of displaying [0].Surface Mountis used to mount this electronic component.The pins are [0].It operates from 3.35V power supplies.Initially, the maximum supply voltage (Vsup) is 5.25V.It is recommended that the operating temperature be greater than 0°C.A temperature lower than 70°Cis recommended for operation.The supply voltage (Vsup) should be greater than 4.75V.This device should not have an clock frequency greater than 166.7MHz.There is a type of programmable logic called EE PLD.
ATF1502AS-7JC44 Features
J package
32 I/Os
44 pin count
44 pins
3.35V power supplies
ATF1502AS-7JC44 Applications
There are a lot of Atmel (Microchip Technology) ATF1502AS-7JC44 CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Address decoders
- Power automation
- Protection relays
- Programmable polarity
- State machine design
- Voltage level translation
- TIMERS/COUNTERS
- INTERRUPT SYSTEM
- Code converters