ATF1500AL-20JU
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF15xx |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 41.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF1500 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 100 program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | FLASH |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Number of Gates | 1000 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.572mm |
| Length | 16.586mm |
| Width | 16.586mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF1500AL-20JU Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a 44-LCC (J-Lead) package containing it.As a result, it has 32 I/O ports programmed.44terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.A voltage of 5Vprovides power to the device.This part is in the family [0].Tubeshould be used for packaging the chip.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.FPGAs belonging to the ATF15xxseries contain this type of chip.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.There are 1000 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].For data storage, FLASHis adopted.Surface Mountis the mounting point of this electronic part.The device has a pinout of [0].This device operates at a voltage of 5.5V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vvolts is required to operate this device.There is 41.7MHz frequency that can be achieved.
ATF1500AL-20JU Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pins
5V power supplies
ATF1500AL-20JU Applications
There are a lot of Microchip Technology ATF1500AL-20JU CPLDs applications.
- Power Meter SMPS
- PLC analog input modules
- Software Configuration of Add-In Boards
- Programmable power management
- Storage Cards and Storage Racks
- I/O expansion
- DMA control
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- Interface bridging