ATF1500ABV-15JI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of I/O | 32 |
| Clock Frequency | 52.6MHz |
| Propagation Delay | 15 ns |
| Programmable Logic Type | FLASH PLD |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF1500ABV-15JI Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].It is equipped with 32I/O ports.There is a 44terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 3V volts.It belongs to the family [0].There are 44pins on the chip.If this device is used, you will also be able to find [0].This electronic part is mounted in the way of Surface Mount.There are 44 pins embedded in the device.The system runs on a power supply of 3/5V watts.In this case, the maximum supply voltage (Vsup) is 5.5V.It is recommended that the operating temperature exceed -40°C.A temperature less than 85°Cshould be used for operation.Vsup (supply voltage) must be greater than 2.7V.Ideally, its clock frequency should not exceed 52.6MHz.Programmable logic types can be divided into FLASH PLD.
ATF1500ABV-15JI Features
J package
32 I/Os
44 pin count
44 pins
3/5V power supplies
ATF1500ABV-15JI Applications
There are a lot of Atmel (Microchip Technology) ATF1500ABV-15JI CPLDs applications.
- Dedicated input registers
- Portable digital devices
- Power automation
- Cross-Matrix Switch
- Address decoders
- POWER-SAVING MODES
- ON-CHIP OSCILLATOR CIRCUIT
- High speed graphics processing
- Page register
- Handheld digital devices