| Parameters |
| Mount |
Surface Mount |
| Package / Case |
A |
| Number of Pins |
44 |
| JESD-609 Code |
e0 |
| Moisture Sensitivity Level (MSL) |
3 |
| Number of Terminations |
44 |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Additional Feature |
NO |
| HTS Code |
8542.39.00.01 |
| Technology |
CMOS |
| Terminal Form |
GULL WING |
| Peak Reflow Temperature (Cel) |
240 |
| Supply Voltage |
5V |
| Terminal Pitch |
0.8mm |
| Time@Peak Reflow Temperature-Max (s) |
30 |
| Pin Count |
44 |
| Supply Voltage-Max (Vsup) |
5.25V |
| Power Supplies |
5V |
| Supply Voltage-Min (Vsup) |
4.75V |
| Number of I/O |
32 |
| Clock Frequency |
52.6MHz |
| Propagation Delay |
15 ns |
| Number of Macro Cells |
32 |
| JTAG BST |
NO |
| In-System Programmable |
NO |
| Height Seated (Max) |
1.2mm |
| Length |
10mm |
| Width |
10mm |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Contains Lead |
ATF1500A-15AC Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the Apackage, you will find it.There are 32 I/Os on the board.Terminations of devices are set to [0].The power source is powered by 5Vvolts.It has 44pins programmed.If this device is used, you will also be able to find [0].This device is mounted by Surface Mount.This board has 44 pins.This device runs on 5Vvolts of electricity.Vsup reaches 5.25Vas the maximum supply voltage.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be below 70°C.There should be a higher supply voltage (Vsup) than 4.75V.It is recommended that the clock frequency not exceed 52.6MHz.
ATF1500A-15AC Features
A package
32 I/Os
44 pin count
44 pins
5V power supplies
ATF1500A-15AC Applications
There are a lot of Atmel (Microchip Technology) ATF1500A-15AC CPLDs applications.
- TIMERS/COUNTERS
- D/T registers and latches
- ON-CHIP OSCILLATOR CIRCUIT
- Digital multiplexers
- Programmable polarity
- Handheld digital devices
- I/O expansion
- PULSE WIDTH MODULATION (PWM)
- LED Lighting systems
- Address decoding