AT17LV512-10CU
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 15MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV512 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 512KX1 |
| Memory Width | 1 |
| Density | 512 kb |
| Standby Current-Max | 0.0001A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AT17LV512-10CU Overview
A neat 8-TDFN package is used.Tube external packaging.Qualified to perform a variety of tasks within the -40°C~85°C environment.Using Serial EEPROM, you can program it.An electric current of 3V~3.6V 4.5V~5.5V is applied to it.There is a memory device mounted in Surface Mount position for this device.AT17LV512 will give you other related parts.3.3V is the required supply voltage.A termination with different functions in the 8 axis.3.6V is the maximum voltage that can be used with this memory device.If the device needs to be supplied with power, then a minimum voltage of 3V is required.In reflow soldering, the temperature should be controlled to a maximum of 260 degrees during the process.There are 8 pins on it.The use of a 3.3/5V power supply is recommended in order to achieve best results.In order to better serve the needs, IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO is included.An example of a EEPROM memory.Memory is suMemoryable for Surface Mount applications.Swicthing controllers work at 15MHz frequencies.
AT17LV512-10CU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 15MHz.
AT17LV512-10CU Applications
There are a lot of Microchip Technology AT17LV512-10CU applications of configuration proms for FPGAs.
- printers
- DVD disk buffer
- supercomputers
- networks
- multimedia computers
- servers
- mainframes
- data buffer
- networking
- Cache memory