AP2196SG-13
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 19 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2196 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
AP2196SG-13 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.The switch type is USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver is equipped with 2 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is P-Channel volts at maximum.As far as features are concerned, the LED driving board has Status Flag.The AP2196 family consists of this type.The termination count is 8.For operation, we use the 8 pins.It contains 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.As a result, it is mounted in the manner of Surface Mount.A total of 8 pins are present on it.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).This part is powered by 3/5V.
AP2196SG-13 Features
Supplied from 3.3V
AP2196SG-13 Applications
There are a lot of Diodes Incorporated AP2196SG-13 Power Switches ICs applications.
- Portable GPS
- Hot Swaps
- Wireless Headsets
- Hot Swap
- Hot-Swap Systems
- Gaming
- Solid-State Drives
- HDD, SSD
- Telecom and Network Systems
- USB Power Distribution