AP2181WG-7
| Parameters | |
|---|---|
| Base Part Number | AP2181 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
AP2181WG-7 Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package SC-74A, SOT-753.The LED driver is mounted as Surface Mount.It owns USB Switch switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.This object belongs to the AP2181 family.It has a total of 5 terminations.It is necessary to use the 5 pins in order to operate the LED driver.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 1.5A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.There are 5 pins in total on this board.Currently, the LED driving board has a resistance of 115MOhm ohms.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.
AP2181WG-7 Features
Supplied from 5V
Resistance of 115MOhm
AP2181WG-7 Applications
There are a lot of Diodes Incorporated AP2181WG-7 Power Switches ICs applications.
- HDD, SSD
- Gaming
- Solid State Drivers
- Storage Drives
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Hot Swaps
- HDD and SSD
- Mobile Communication Devices
- PC Card Hot Swap