AP2156SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 135MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2156 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2156SG-13 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There are 2 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Status Flag.There is a AP2156 family of things that it belongs to.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.There are 1 functions of the LED driver.The maximum output current is reduced to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.In total, it has 8 pins.It has a resistance of 135MOhm.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The power supply of the part is 5V.
AP2156SG-13 Features
Supplied from 3.3V
Resistance of 135MOhm
AP2156SG-13 Applications
There are a lot of Diodes Incorporated AP2156SG-13 Power Switches ICs applications.
- Handheld Devices
- Wireless Modem Data Cards
- Wireless Headsets
- Hot Swap
- Mobile Communication Devices
- PC Card Hot Swap
- Gaming
- PDAs
- Portable Video Game Players
- Various applications equipped with buttons