AP2141FMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2141 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 560μm |
| Length | 1.88mm |
| Width | 2.075mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2141FMG-7 Overview
It is package in Tape & Reel (TR) case.The 6-UFDFN Exposed Pad package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.Features of the lighting driver are Load Discharge, Status Flag.It belongs to the family AP2141.There are 6 terminations in it.6 pins are used for operation.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 6 pins in total on this board.It has a resistance of 120mOhm.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part's power supply is 3/5V.
AP2141FMG-7 Features
Supplied from 5V
Resistance of 120mOhm
AP2141FMG-7 Applications
There are a lot of Diodes Incorporated AP2141FMG-7 Power Switches ICs applications.
- Portable GPS Device
- Hot Swap
- USB Protection
- Portable Devices
- Handheld Devices
- Mobile Communication Devices
- USB Power Distribution
- Wireless Modem Data Cards
- Set-Top Boxes
- Storage (HDDs, SSDs)