AN44069A-VF
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-BSOP (0.327, 8.30mm Width) + 2 Heat Tabs |
| Number of Pins | 28 |
| Supplier Device Package | 28-HSOP |
| Operating Temperature | -20°C~120°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | AN44069A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 37V |
| Max Output Current | 1.5A |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 717mW |
| Current - Output | 1.5A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 34V |
| Max Collector Current | 1.5A |
| Voltage - Load | 16V~34V |
| Switching Frequency | 52kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| Height | 2.6mm |
| Length | 18.4mm |
| Width | 8.3mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN44069A-VF Overview
Drivers controllers is designed wDrivers controllersh a package of [0].Drivers controllers is packaged wDrivers controllersh a 28-BSOP (0.327, 8.30mm Width) + 2 Heat Tabs case.Mounting the part by Surface Mountis recommended.As a result, it is appropriate for the component connected to General Purpose.In this case, the device can supply 4.5V~5.5V volts.There is a temperature range of -20°C~120°C TJin which this device operates.In this case, the voltage can be applied to the load at the rate of 16V~34V.There is a recommended mounting method of Surface Mount.Set the part's output current to 1.5A.AN44069Ais the part number that finds it.This device is designed with a pin count of 28.There are 2 outputs available.The output voltage is maintained at 37V.The motor type can be identified as Stepper.Controller ic reaches 70°Cat the maximum operating temperature.Controller ic is recommended that the operating temperature be higher than -20°C.In order to satisfy the requirements of operation, the maximum output current reaches [0].The device is capable of operating at a maximum supply voltage of 5.5V.This device is able to operate with a minimum supply voltage of 4.5V.
AN44069A-VF Features
Applications : General Purpose
Load voltage across the chip 16V~34V
base on AN44069A number
designed with 2 outputs
Motor Type classified as Stepper
AN44069A-VF Applications
There are a lot of Panasonic Electronic Components AN44069A-VF motor drivers applications.
- Camera-enabled smartphones
- parking lights
- Dash
- Daytime running lights (DRLs)
- Indicator
- LCD displays
- A cross between entertainment
- Tail lights
- General lighting
- Horticultural applications