AN44065A-VF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-BSOP (0.327, 8.30mm Width) + 2 Heat Tabs |
| Number of Pins | 28 |
| Supplier Device Package | 28-HSOP |
| Operating Temperature | -20°C~120°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | AN44065A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 30V |
| Max Output Current | 1.5A |
| Interface | Parallel, PWM |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 5.7mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 717mW |
| Current - Output | 1.5A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 30V |
| Max Collector Current | 1.5A |
| Voltage - Load | 18V~28V |
| Switching Frequency | 58kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| Height | 2.6mm |
| Length | 18.4mm |
| Width | 8.3mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN44065A-VF Overview
There is a Tape & Reel (TR)package included in the design.The part is packaged in a 28-BSOP (0.327, 8.30mm Width) + 2 Heat Tabs case.Drivers controllers is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.This device is capable of supplying voltages up to 4.5V~5.5V volts.A range of -20°C~120°C TJis available for operating temperature.Drivers controllers is possible to apply voltage at a rate of 18V~28Vto the load.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a current of 1.5A for the part output.The AN44065Apart number allows us to locate it.28 pins are provided for its design.There are 2 outputs available.30Vis maintained as the output voltage.As a result, we can recognize that the motor type is Stepper.There is a maximum operating temperature of 70°C.There should be a temperature higher than -20°Cduring operation.Its maximum output current reaches 1.5Ato meet the operational requirements.With its maximum supply voltage of [0], it is capable of applying the device.A minimum supply voltage of 4.5Vis required for the device to operate.
AN44065A-VF Features
Applications : General Purpose
Load voltage across the chip 18V~28V
base on AN44065A number
designed with 2 outputs
Motor Type classified as Stepper
AN44065A-VF Applications
There are a lot of Panasonic Electronic Components AN44065A-VF motor drivers applications.
- Charge pump circuits
- Running preventive- maintenance diagnostics
- LCD displays
- Smart lighting applications
- parking lights
- Indicator circuit
- Alternative to HID lights
- Hidden coves in high-end residential settings
- Infotainment backlighting
- Arena lighting