ALD2321ASCL
| Parameters | |
|---|---|
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 200μV |
| Input Bias Current | 20pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
ALD2321ASCL Overview
In order to facilitate transportation, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL .The chip is packaged with Tube .This is a typical comparator of type General Purpose .In total, it contains 2 elements.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 16 pins.A quiescent current of 180μA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 180μA .If the current supply exceeds 180μA , the comparator could malfunction.In general, temperatures higher than 70°C are not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 10V when the comparator is operating at its maximum supply voltage.Using a voltage as low as 3V is possible for this comparator.To ensure a high level of output quality, 2 channels work together.The part is based on EPAD? .
ALD2321ASCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321ASCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321ASCL linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- Infotainment and Clusters
- General Purpose Low Voltage Applications
- Industrial
- Simple Analog-to-Digital Converters (ADCs)
- Consumer Medical Electronics
- Appliances
- Security Detection Systems
- Hand-Held Electronics