ADP191ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-WFBGA, WLCSP |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 7.2μW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP191 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 3.6V |
| Interface | On/Off |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 500mA |
| Output Configuration | High Side |
| Power Dissipation | 7.2μW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 500mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Driver Number of Bits | 1 |
| Turn On Time | 80 μs |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 0.66mm |
| Length | 0.76mm |
| Width | 0.76mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP191ACBZ-R7 Overview
A Tape & Reel (TR) is used to package it.Package 4-WFBGA, WLCSP contains it.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the ADP191 family.As a result, there are 4 terminations.The operation is carried out using the 4 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 1.2V.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 4 pins.Currently, the LED driving board has a resistance of 160mOhm ohms.This case results in a 500mA output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Optimal efficiency requires a voltage of 3.6V.Input voltage is limited to 3.6V volts.The minimum input voltage is 1.1V volts.For its operation, a current of 500mA is required.
ADP191ACBZ-R7 Features
Supplied from 1.2V
Resistance of 160mOhm
ADP191ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP191ACBZ-R7 Power Switches ICs applications.
- PC Cards
- USB Power Distribution
- Storage Drives
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- PDAs
- USB Power Distribution
- Solid-State Drives
- Notebook PC
- Hard Disk Drives