ADP1196ACBZ-02-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 65.99769mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | TIN SILVER COPPER |
| Technology | NMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADP1196 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 3A |
| Output Configuration | High Side or Low Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 0V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.83V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10m Ω |
| Turn Off Time | 800 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 380μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1196ACBZ-02-R7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 6-WFBGA, WLCSP package includes it.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~105°C TJ.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Slew Rate Controlled features.The ADP1196 family consists of this type.In total, there are 6 terminations.For operation, we use the 6 pins.The LED driver has 1 functions.The maximum output current drops to 3A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 1.8V.The lighting driver is mounted in the direction of Surface Mount.A total of 6 pins are included in this LED driver.It has a resistance of 10mOhm.This case has the output current set to 3A.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 0V volts for this LED driver.
ADP1196ACBZ-02-R7 Features
Supplied from 1.8V
Resistance of 10mOhm
ADP1196ACBZ-02-R7 Applications
There are a lot of Analog Devices Inc. ADP1196ACBZ-02-R7 Power Switches ICs applications.
- Hard Disk Drives
- Solid-State Drives
- PC Card Hot Swap
- Portable Devices
- Portable GPS Device
- USB Ports/Hubs
- PDAs
- Wireless/Networking Cards
- Notebook PC
- Portable GPS