ADG841YKSZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 370mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 14.4μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG841 |
| Pin Count | 6 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 14.4μW |
| Max Supply Current | 4μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7.8 ns |
| -3db Bandwidth | 21MHz |
| On-State Resistance (Max) | 370mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 54 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 160pF 160pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 7.8ns |
| Charge Injection | 200pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 8.2ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Normal Position | NO |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG841YKSZ-REEL Overview
This electronic part is conveniently packaged in 6-TSSOP, SC-88, SOT-363, making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. There are 6 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. It is part of the design of the 6 series that this electronic component is included. SPST - NO switching circuits are used in these analog switch ics. There are 1 circuits in this multiplexer. Try searching for ADG841 variants of the analog switch ic. The internal resistance of this digital multiplexer is 370mOhm. The functions of 6 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~3.6V. If you put voltage higher than 4μA on the digital multiplexer, damage may occur.
ADG841YKSZ-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 21MHz
ADG841YKSZ-REEL Applications
There are a lot of Analog Devices Inc. ADG841YKSZ-REEL Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Relay Replacement
- Avionics test equipment
- Cable PC
- Channelized and Unchannelized DS3 applications
- Fiber to the Home
- Data Acquisition Systems
- PBXs
- Avionics and Military Systems
- Precision test equipment