ADG732BCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG732 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 32 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10μA |
| Power Dissipation | 100μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 18MHz |
| Supply Current-Max (Isup) | 0.02mA |
| Turn-Off Delay Time | 16 ns |
| On-State Resistance (Max) | 5.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 32:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 275pF |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 43ns |
| Signal Current-Max | 0.03A |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG732BCPZ-REEL Overview
Shipping overseas is convenient with the electronic component packed in 48-VFQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 32:1 represents the number of circuits. Operation at a temperature around -40°C~125°C TA. Total terminations are 48. Due to its 32 channels, the electrical component produces high-quality output. This electronic part can be found in the 48 series. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG732. A 5.5Ohm internal resistance characterizes this multiplexer. Datasheets for 48 pin functions are available upon request. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 1.8V is the lowest voltage the electrical component should receive. 10μA current would be enough for this multiplexer to operate. Operating voltages range from 5V. In 18MHz-bandwidths, data can be transferred.
ADG732BCPZ-REEL Features
32 Channels
10μA Supply Current
Bandwidth: 18MHz
ADG732BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG732BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- E1 Network Equipment
- Public switching systems
- SDH/SONET multiplexers
- Cellular phones
- SONET/SDH ADM
- PCMCIA cards
- Remote Powered Equipment
- Central office
- Power routing