ADG708BRU-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 55MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 25ns |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG708BRU-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. The multiplexer consists of 1 circuits. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
ADG708BRU-REEL Features
8 Channels
-3db Bandwidth: 55MHz
ADG708BRU-REEL Applications
There are a lot of Rochester Electronics, LLC ADG708BRU-REEL Analog Switches & Multiplexers ICs applications.
- Isolation
- Digital cross connects (DSX-1)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Power routing
- Cross Connects
- Frame Relay Equipment
- Modems
- Intelligent PBX
- High speed data transmission line cards
- Fiber to the Home