ADG506AKP-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Base Part Number | ADG506 |
| JESD-30 Code | S-PQCC-J28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| RoHS Status | Non-RoHS Compliant |
ADG506AKP-REEL Overview
As the electronic part is packed in 28-LCC (J-Lead), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 16:1. Operation at a temperature around -40°C~85°C TA. In total, there are 28 terminations. The electronic part provides high-quality output because it has 16 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Circuits number 1 make up this analogue multiplexer. ADG506 can be used to search for analog multiplexer variants. Multiplexers should not be powered above 16.5V in normal situations. A low voltage of 10.8V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VA dual power supply should have at least 10.8V voltage attached. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
ADG506AKP-REEL Features
16 Channels
ADG506AKP-REEL Applications
There are a lot of Analog Devices Inc. ADG506AKP-REEL Analog Switches & Multiplexers ICs applications.
- Cell phones
- Private Branch Exchange (PBX)
- 65 V DACs
- Switching Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Sample hold systems
- Signal routing between systems
- Low-Voltage
- Avionics and Military Systems
- High reliability control systems