ADG452BR-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 12V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 37pF 37pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 180ns, 140ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 220ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG452BR-REEL7 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. SPST - NO switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 4.
ADG452BR-REEL7 Features
1 Channels
Switch Circuit: SPST - NO
ADG452BR-REEL7 Applications
There are a lot of Rochester Electronics, LLC ADG452BR-REEL7 Analog Switches & Multiplexers ICs applications.
- RGB switches
- Data Acquisition Systems
- Industrial control systems
- Digital cross connects (DSX-1)
- Fiber to the Home
- Audio signal routing
- PBXs
- Precision test equipment
- Digital access cross connects
- High speed data transmission line cards