ADG438FBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | FAULT PROTECTED; OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 15V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 270Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 22pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switch-on Time-Max | 250ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG438FBR Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. 8:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 16 series. A 1 circuit is present in this switch device. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. You shouldn't miss the additional features of the electrical component, such as: FAULT PROTECTED; OVERVOLTAGE PROTECTION.
ADG438FBR Features
8 Channels
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
ADG438FBR Applications
There are a lot of Rochester Electronics, LLC ADG438FBR Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- E1 Network Equipment
- Switching Systems
- Avionics test equipment
- 65 V DACs
- Signal routing between systems
- Private Branch Exchange (PBX)
- Sample hold systems
- Data switching
- Microwave transmission systems