ADG431BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 24Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.85Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 90ns, 60ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 1.2 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 165ns |
| Switch-off Time-Max | 130ns |
| Height Seated (Max) | 5.33mm |
| Length | 20.13mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ADG431BN Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPST - NC switching circuits. There are 4 circuits in this switch device.
ADG431BN Features
1 Channels
Switch Circuit: SPST - NC
ADG431BN Applications
There are a lot of Rochester Electronics, LLC ADG431BN Analog Switches & Multiplexers ICs applications.
- Medical systems
- High reliability control systems
- Avionics
- Sample-and-hold systems
- Communications systems
- HDTV
- Microprocessor controlled systems
- Multi-Line E1 Interface Cards
- Routers
- High speed data transmission line cards