ADG409BR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG409BR Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 16 pins. A SP4T switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
ADG409BR Features
4 Channels
Switch Circuit: SP4T
ADG409BR Applications
There are a lot of Rochester Electronics, LLC ADG409BR Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Optical Applications
- PBX interfaces
- Communication systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Data Acquisition Systems
- Avionics
- FTTH
- DSLAMs
- USB 1.1 signal switching circuits