ADG3249BRJ-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3249 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Max Supply Current | 200μA |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 200μA |
| Turn On Delay Time | 8.2 ns |
| Logic Function | Demultiplexer, Multiplexer |
| -3db Bandwidth | 610MHz |
| On-State Resistance (Max) | 8Ohm |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF 4.5pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Voltage - Supply, Single (V+) | 2.3V~3.6V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3249BRJ-REEL Overview
Shipping overseas is convenient with the electronic component packed in SOT-23-8. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. In total, there are 8 terminations. A 2 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 8 series. Unlike digital switches, these are based on SPDT switching circuits. ADG3249 can be used to search for analog multiplexer variants. A 8Ohm internal resistance characterizes this multiplexer. For details about the functions of 8 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. The lowest voltage fed to the electronic component should be 2.3V. This analogue multiplexer requires a voltage of 2.3V~3.6V when it drains from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 200μA. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. It conducts in a 2-bit manner.
ADG3249BRJ-REEL Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 610MHz
2-Bit
ADG3249BRJ-REEL Applications
There are a lot of Analog Devices Inc. ADG3249BRJ-REEL Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Remote wireless modules
- Switching Systems
- Residential Gateways, Home Gateway/Router
- PDAs
- Automatic test equipment
- Frame Relay Equipment
- Routers
- ATM
- Audio signal routing