ADG211AKR-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 15V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 115Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 600ns, 450ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 5.75 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switch-on Time-Max | 600ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG211AKR-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. There are 4 circuits in this multiplexer.
ADG211AKR-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
ADG211AKR-REEL7 Applications
There are a lot of Rochester Electronics, LLC ADG211AKR-REEL7 Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Precision data acquisition
- CSU
- Ultrasound
- SONET/SDH ADM
- Intelligent PBX
- PBX interfaces
- Fault Tolerant Systems
- Modems
- Data switching