ADCMP581BCP-WP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LFCSP EP |
| Number of Pins | 16 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Temperature Grade | AUTOMOTIVE |
| Nominal Supply Current | 8mA |
| Power Dissipation | 200mW |
| Response Time | 180 ps |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 30μA |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADCMP581BCP-WP Overview
The product is packaged in LFCSP EP to facilitate transportation.As you can see, the comparator has16 terminals.The component belongs to the Comparators family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.There are a total of 1 elements in it.There are 16 pins on this board.Electronic comparator has 16 pins.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 8mA for normal use.There is sufficient power to run the device from +-53.3V power supplies.The voltage formula shows that the part has a voltage gain of 48dB .In general, temperatures higher than 125°C are not recommended.A temperature lower than -40°C is unsuitable for the device.Comparator electronics consists essentially of a high gain COMPARATOR amplifier.
ADCMP581BCP-WP Features
Employing 1 elements
Voltage Gain: 48dB
COMPARATOR amplifier
ADCMP581BCP-WP Applications
There are a lot of Analog Devices, Inc. ADCMP581BCP-WP linear comparators applications.
- Mobile Communications
- Factory automation & control
- RC Timers
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
- Handheld Instruments
- Power management
- Self-diagnostics
- Consumer Medical Electronics
- High-Speed Sampling Circuits