ADCMP565BP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Max Power Dissipation | 490mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADCMP565 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Differential, ECL, Open-Emitter |
| Number of Elements | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 550mW |
| Output Current | 30mA |
| Propagation Delay | 375 ps |
| Quiescent Current | 80mA |
| Turn On Delay Time | 310 ps |
| Response Time | 0.375 ns |
| Common Mode Rejection Ratio | 69 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 6mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 40μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 18mA 80mA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 40μA @ 5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 69dB CMRR |
| Propagation Delay (Max) | 0.375ns |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADCMP565BP Overview
To facilitate transportation, it comes packaged in 20-LCC (J-Lead) .The comparator has an output type of Complementary, Differential, ECL, Open-Emitter .Ready for shipping in Tube package.20 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a with Latch chip.Electronic comparator has a total of 2 elements.The device contains 20 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .20 pins are available on the comparator.In order to find a solution that meets your specific needs, search ADCMP565 for more pin-to-pin solutions.There is a quiescent current of 80mA in this comparator.Normal use of the device should require a nominal supply current of 18mA .According to the voltage formula, the part has a voltage gain of 60dB .
ADCMP565BP Features
Complementary, Differential, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 80mA
Voltage Gain: 60dB
ADCMP565BP Applications
There are a lot of Analog Devices Inc. ADCMP565BP linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- Self-diagnostics
- Mobile Communications
- Security Detection Systems
- Power management
- Power Supervision
- Multivibrators and High-Voltage Digital Logic Gates
- Handheld Instruments
- Wireless Base Stations