AD8611ARMZ-REEL
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 50mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8611 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 50mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 6μA |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
AD8611ARMZ-REEL Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has an output type of Complementary, TTL .The chip is packaged with Tape & Reel (TR) .You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as with Latch .The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You can search AD8611 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 4mA volts.Normally, the nominal supply current should be 10mA .This device requires 3/5V power supplies to operate.You are allowed to input a maximum current of 6μA into the device.Comparator electronics follows that the voltage gain of the part is 69.54dB .
AD8611ARMZ-REEL Features
Complementary, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8611ARMZ-REEL linear comparators applications.
- Window Comparators
- Mobile Communications
- Power Supervision
- Limit Comparators
- General-Purpose, Low-Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Security Detection Systems
- Pulse, Squarewave, and Time Delay Generators
- High-Speed Sampling Circuits
- Mobile Phones and Tablets