AD848JNZ
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD848 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.1mA |
| Power Dissipation | 1.1W |
| Output Current | 20mA |
| Quiescent Current | 4.8mA |
| Slew Rate | 300V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 2.3mV |
| Bandwidth | 175MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 175000 kHz |
| Voltage Gain | 82.28dB |
| Average Bias Current-Max (IIB) | 7.2μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Voltage - Input Offset | 200μV |
| Settling Time | 80 ns |
| Dual Supply Voltage | 9V |
| Input Capacitance | 1.5pF |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
AD848JNZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.1mA and 10 . 82.28dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. There is a quiescent current of 4.8mA in this operational amplifier circuit.
AD848JNZ Features
8 Pins
supply voltage of 15V
82.28dB voltage gain
AD848JNZ Applications
There are a lot of Analog Devices Inc. AD848JNZ Instrumentational OP Amps applications.
- RF cable systems
- Precision measurement
- Test and measurement instruments
- Professional videography
- Integrator circuits
- Comparator
- PDA
- Signal transformation
- Micro signal measurement
- Portable electronic products powered by batteries