AD8422ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8422 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 300μA |
| Max Supply Current | 1nA |
| Slew Rate | 0.8V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 3.6V~36V ±1.8V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 300nV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.002μA |
| Voltage - Input Offset | 60μV |
| -3db Bandwidth | 2.2MHz |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8422ARZ Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 15V battery. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 300nV voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 300μA volt supply current is needed for this linear amplifier to operate. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
AD8422ARZ Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
AD8422ARZ Applications
There are a lot of Analog Devices Inc. AD8422ARZ Instrumentational OP Amps applications.
- Exponential operation circuits
- High input resistance broadband
- High gain DC amplifier
- MP3
- Band-pass filter
- Proportional operation circuits
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Portable media players
- Car stereo