AD8278BRMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120kOhm |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8278 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Slew Rate | 1.4V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 0.55MHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8278BRMZ-R7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Differential-types. Instrumentation amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. Instrumentation amplifier is a part of Instrumentation Amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 200μA , this buffer op amp will be able to operate. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. 120kOhm is the range in which the instrumentation amplifier resistance should lie.
AD8278BRMZ-R7 Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
Resistance of 120kOhm
AD8278BRMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8278BRMZ-R7 Instrumentational OP Amps applications.
- pH (acidity)
- Division circuits
- Communication device
- Oscilloscopes
- Navigation
- Weak signal detection
- Proportional counter tubes
- Fission chambers
- Signal amplification
- Measurements of Wheatstone bridge