AD790JRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD790 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Dissipation | 250mW |
| Propagation Delay | 50 ns |
| Quiescent Current | 10mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~7V ±2.25V~16.5V |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| Hysteresis | 500μV |
| CMRR, PSRR (Typ) | 95dB CMRR, 90dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD790JRZ-REEL Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, TTL output is used here.This device is designed in Tape & Reel (TR) case.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 15V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type with Latch .This is a 1 element comparator.There are 8 pins on this board.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.You can search AD790 if you are looking for more pin-to-pin solutions.A quiescent current of 10mA is observed in this comparator.Electronic comparator is possible to input up to 5μA current into the device.In order to operate normally, a supply voltage of 0 is required.
AD790JRZ-REEL Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
AD790JRZ-REEL Applications
There are a lot of Analog Devices Inc. AD790JRZ-REEL linear comparators applications.
- General Purpose Low Voltage Applications
- DC/DC and AC/DC power supplies
- High-Speed Sampling Circuits
- System control and monitoring
- Motor drives
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Portable Battery Monitoring
- Battery-Powered Electronics
- Wearable Devices