AD537JD
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 150kHz |
| Base Part Number | AD537 |
| Pin Count | 14 |
| Operating Supply Voltage | 28V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Accuracy | 0.25 % |
| Frequency (Max) | 100kHz |
| Max Input Voltage | 11V |
| Reference Voltage | 1V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.05% |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Positive Input Voltage-Max | 32V |
| Full Scale | ±30ppm/°C |
| Height | 3.56mm |
| Length | 19.94mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD537JD Overview
This package is embedded in the 14-CDIP (0.300, 7.62mm) package. This electronic part is mounted in the way of Through Hole. Tube packages it in this way. An electrical device of this type is designated as Voltage to Frequency. The 14 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. The device is equipped with a pin count of 14. It is possible to determine the related parts of a base part number. There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. It operates with the minimal operating temperature of 0°C to ensure its reliability. To ensure reliability, the device operates at a maximum operating temperature of 70°C. It is mounted in the way of Through Hole. As part of Analog Special Function Converters, this part is included. Supply voltage (Vsup) should be greater than 4.5V. The maximum supply voltage (Vsup) reaches 36V. There is a frequency 150kHz that it operates at. A maximum frequency of 100kHz is used for its operation. It is necessary to supply 2.5mA with a current so that it can fully perform its function. Input type 11V is the maximum for this electronic part. There is a voltage of 28V at which this electrical device operates. Power is supplied by a dual supply voltage of 9V. In this electrical device, the reference voltage is 1V. IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY is also a characteristic of it.
AD537JD Features
14-CDIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 9V
AD537JD Applications
There are a lot of Analog Devices Inc. AD537JD V/F & F/V Converters applications.
- 13-bit Analog-to-Digital Converters (ADC)
- lsolation of High Common-Mode Voltages
- Battery Monitoring
- Automotive Sensing
- Phase Locked Loops
- FM Demodulation
- Low-Cost Analog-to-Digital Conversion
- Over-and Under-Speed Sensing
- Speed Governors
- Voltage to Frequency Conversions