AAT4618IGV-0.5-1-T1
| Parameters | |
|---|---|
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 750mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 125m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | ASPM™ |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
AAT4618IGV-0.5-1-T1 Overview
It is package in Cut Tape (CT) case.The SC-74A, SOT-753 package contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.Currently, the LED driving board is equipped with Status Flag features.The termination count is 5.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.High efficiency is possible when the supply voltage is set to 5V.A total of 5 pins are present on it.This electrical component is part of the ASPM? series.In this case, the output current will be set to 750mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a power supply of 5V.Optimal efficiency requires a voltage of 5.5V.As far as input voltage goes, its maximum is 5.5V volts.It requires 2.4V volts as the minimum input voltage.
AAT4618IGV-0.5-1-T1 Features
Supplied from 5V
AAT4618IGV-0.5-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4618IGV-0.5-1-T1 Power Switches ICs applications.
- Wireless/Networking Cards
- Mobile Communication Devices
- Telecom and Network Systems
- USB Ports/Hubs
- Portable Video Game Players
- Portable Devices
- Smartphone and PDA
- Hot Swap
- Gaming
- Storage Drives