A6818SEPTR-T
| Parameters | |
|---|---|
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Nominal Supply Current | 4.5mA |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
A6818SEPTR-T Overview
It is package in Tape & Reel (TR) case.In the 44-LCC (J-Lead) package, it is included.This lighting drivere has a mounting type of Surface Mount.This switch is of type Latched Driver.In order to guarantee reliable performance, the temperature should be set to -20°C~85°C TA.It is possible to use 32 outputs in the lighting driver.A supply voltage of 3V~5.5V is required for it to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.I believe it belongs to the A6818 family.It has a total of 44 terminations.It is necessary to use the 44 pins in order to operate the LED driver.It contains 1 functions.It is necessary to reduce the maximum output current to 40mA to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.44 pins are connected to it in total.When this case is used, the output current is set to 15mA.This LED driver is self-contained in an econtainer with a capacity of Display Drivers.This part has a power supply of 3.3/560V volts.This LED driver can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818SEPTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818SEPTR-T Applications
There are a lot of Allegro MicroSystems A6818SEPTR-T Power Switches ICs applications.
- Hot Swaps
- Mobile Communication Devices
- Telecom and Network Systems
- Hard Disk Drives
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Hot Swap
- PDAs
- Portable Devices