A3973SB-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A3973 |
| JESD-30 Code | R-PDIP-T24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Serial |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Voltage - Load | 15V~35V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/64 |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3973SB-T Overview
There is a Tubepackage included in the design.24-PowerDIP (0.300, 7.62mm)cases are included with the part.A mounting position of Through Holeis recommended for the part.I believe it would be suitable for the component connected to General Purpose.4.5V~5.5V volts can be supplied by the device.Operation temperature ranges from -20°C~150°C TJ.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 15V~35V.This amplifier should be operated at 5V.A Through Holemounting method is recommended for this product.Maintain a 1Aoutput current for the part.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.The part number A3973indicates that it is found.The available outputs are [0].In this case, 35Vis maintained as the output voltage.
A3973SB-T Features
Applications : General Purpose
Load voltage across the chip 15V~35V
base on A3973 number
designed with 1 outputs
A3973SB-T Applications
There are a lot of Allegro MicroSystems A3973SB-T motor drivers applications.
- Tunnel lights
- Accurate LED current matching
- Horticultural lighting
- Automotive instrumentation
- Monitoring the energy that the luminaire uses
- PWM generators
- Commercial office
- Telltale lights
- Lighting for the ambience of tunability
- Running preventive- maintenance diagnostics