A3953SB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A3953 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.3A |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Max Output Voltage | 50V |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 3V~50V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A3953SB Overview
The package contains [0].Parts are packaged in 16-PowerDIP (0.300, 7.62mm)cases.Mounting the part by Through Holeis recommended.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.3V~5.5V volts can be supplied by the device.The operating temperature ranges from -20°C~150°C TJto -20°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.The part has 16terminations available.In this case, the voltage can be applied to the load at the rate of 3V~50V.Please take in mind that this amplifier should be run at 5V.There is Through Hole recommended mounting method for this device.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.As a result of the A3953part number, it can be found.16pins are available on the device.Drivers controllers belongs to the Motion Control Electronics series.A total of 1outputs are available.The driver operates on a supply voltage of 5V volts.Its maximal output current reaches 1.3A to meet the operation requirements.
A3953SB Features
Applications : General Purpose
Load voltage across the chip 3V~50V
base on A3953 number
designed with 1 outputs
A3953SB Applications
There are a lot of Allegro MicroSystems A3953SB motor drivers applications.
- Charge pump circuits
- Landscape lighting
- Mobile phone display backlight and key light driving
- Digital still cameras
- Industrial high-bay lights
- CHMSL (center high-mount stop lamps)
- Dome
- Telltale lights
- Alternative to HID lights
- Building technology