90HBW08P
| Parameters | |
|---|---|
| Contact Material | Copper Alloy |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Body Material | Thermoplastic |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| Series | 90HB |
| Feature | Tape Seal |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | Gull Wing |
| ECCN Code | EAR99 |
| Number of Positions | 8 |
| Terminal Finish | TIN/NICKEL |
| Voltage - Rated | 24VDC |
| Voltage - Rated DC | 24V |
| Pitch | 0.100 2.54mm Full |
| Orientation | Straight |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Current Rating | 25mA |
| Contact Finish | Gold |
| Termination Style | Gull Wing |
| Body Breadth | 7.37 mm |
| Actuator Type | Slide (Standard) |
| Circuit | SPST |
| Contact Resistance | 20mOhm |
| Insulation Resistance | 1000000000Ohm |
| Contact Current(DC)-Max | 0.1A |
| Max Current Rating | 100mA |
| Dielectric Withstanding Voltage | 500VAC V |
| Electrical Life | 2,000 Cycles |
| Max Voltage Rating (DC) | 30V |
| Mechanical Life | 2,000 Cycles |
| Switch Type | SLIDE DIP SWITCH |
| Contact Timing | MAKE-BEFORE-BREAK |
| Contact (DC) Max Rating R Load | .1A@6VDC |
| Number of Switch Sections | 8 |
| Contact Function | OFF-ON |
| Washable | Yes |
| Actuator Level | Flush, Recessed |
| Solderability | MIL-STD |
| Washability | WATER/STEAM |
| Length | 0.870 22.10mm |
| Width | 22.1mm |
| Actuator Length | 0m |
| Height Above Board | 0.190 4.83mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
See Relate Datesheet