8302102RA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT ENABLE INPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 40mA |
| Height | 5.08mm |
| Length | 24.2mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
8302102RA Overview
In package CDIP, there is an embedded device. 20 is the total number of terminations on the chip. Rail/Tube is the case in which it is packed. The part's operating supply voltage is rated 5V. The part consists of 1 elements. Devices with 20 pins are available. It is recommended to mount by Through Hole in order to get the best results. The electronic component belongs to the ALS. The operating supply voltage of this chip is noted to be within the range 5V. There are also the following additional considerations in this section: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. There is a capability to deliver voltage at 5V. A total of 8 bits are present on an IC chip. The total number of pins is 20. It is recommended that it be used at temperatures below 125°C. It should not be lower than -55°C to operate this device. A voltage of 5.5V is used to supply this voltage. It is important to note that this supply voltage is higher than 4.5V.
8302102RA Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
8302102RA Applications
There are a lot of Texas Instruments 8302102RA Shift Registers applications.
- Remote control holding register
- Serial to parallel converter
- ROM Chips
- Flash Memory
- Cache memory in CPU
- Serial-to-parallel data conversion
- Pattern Recognizers
- Interconnectors
- Counter
- data transfer