7802401SA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 20 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Propagation Delay | 40 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 39 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 53mA |
| Height | 2.45mm |
| Length | 13.09mm |
| Width | 6.92mm |
| Thickness | 1.84mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7802401SA Overview
A total of 20 terminations can be found on the chip. A voltage of 5V is specified for the part's operating supply. A total of 1 elements are present on this part. 20 pins are provided on the device. Using Surface Mount as a mount point is recommended. Electronic components are categorized as LS. 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS. There is a possibility of delivering voltage at 5V. IC chips contain a total of 8 bits. It has a total of 20 pins. A temperature below 125°C is recommended for its use. Ideally, it should not fall below -55°C. Under 5.5V, this supply voltage is employed. It is important to note that this supply voltage is higher than 4.5V. There is TUBE packaging for this part.
7802401SA Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
Packing Method : TUBE
7802401SA Applications
There are a lot of Texas Instruments 7802401SA Shift Registers applications.
- Cache memory in CPU
- Data manipulation
- Serial-to-parallel data conversion
- Remote control holding register
- Data Processors
- Remote control holding register
- Output expansion
- 7-segment display control
- Pseudo Random Pattern Generator
- Parallel data