74VHCT574AMX
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.642mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT574AMX Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. The 74VHCTseries comprises this type of FPGA. It should not exceed 130MHzin terms of its output frequency. A total of 1 elements are present. There have been 20 terminations. The 74VHCT574 family contains this object. A voltage of 5V provides power to the D latch. There is 4pF input capacitance for this T flip flop. This D flip flop belongs to the family of AHCT/VHCT. Surface Mount mounts this electronic component. There are 20pins on it. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. In order to achieve its superior flexibility, 8 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The D latch runs on a voltage of 5V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There is a consumption of 4μAof quiescent current from it. There is also a characteristic of BROADSIDE VERSION OF 374.
74VHCT574AMX Features
Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies
74VHCT574AMX Applications
There are a lot of ON Semiconductor 74VHCT574AMX Flip Flops applications.
- ESCC
- Buffered Clock
- Differential Individual
- Communications
- Cold spare funcion
- QML qualified product
- EMI reduction circuitry
- ESD performance
- Bounce elimination switch
- Parallel data storage