74VHCT574AMTCX
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 191mg |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 80MHz |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT574AMTCX Overview
As a result, it is packaged as TSSOP. There is an embedded version in the package Tape & Reel (TR). Currently, there are 20 terminations. A voltage of 5V is used to power it. This D flip flop belongs to the family of AHCT/VHCT. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in its design. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. This flip flop has a total of 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Currently, there are 1 lines of input. Quiescent current is consumed by the D latch in the amount of 4μA. It is also characterized by BROADSIDE VERSION OF 374. The high level output current is set to -8mA. The low level output current is set to 8mA. It is recommended that the operating temperature be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It is powered by 4.5V as its minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to obtain a frequency of 80MHz. The logic IC it uses is BUS DRIVER. Currently, it is equipped with 1 functions . A total of 8 channels are available.
74VHCT574AMTCX Features
Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions
74VHCT574AMTCX Applications
There are a lot of ON Semiconductor 74VHCT574AMTCX Flip Flops applications.
- Common Clocks
- Latch-up performance
- Pattern generators
- Digital electronics systems
- Event Detectors
- Safety Clamp
- Instrumentation
- Memory
- Counters
- Parallel data storage