74VHC595MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Frequency | 115MHz |
| Base Part Number | 74VHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 18.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Input Current | 100nA |
| Number of Output Lines | 1 |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC595MTCX Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. 16 is the sum of the number of terminations in the chip. Presented in a case of Tape & Reel (TR). Its operating supply voltage is rated at 3.3V. It is equipped with a pin count of 16. Surface Mount is recommended for mounting. Electronic components fall under the category of AHC/VHC. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -40°C~85°C. Votage is supplied within 2V~5.5V. In the 74VHC series, this electrical component is found. A 74VHC595 family can be used to search for similar parts. This part should have a minimum supply voltage (Vsup) of at least 2V. Voltage can be delivered at 2/5.5V. This part should not have a supply voltage (Vsup) greater than 5.5V. A total of 1 output lines need to be operated. A quiescent current of 4μA is used. The device runs at 115MHz.
74VHC595MTCX Features
With 16 pins
Mounted in Surface Mount type.
Based on 74VHC595 family
It supplies 2/5.5V power
With 1 output lines
Quiescent Current at 4μA
74VHC595MTCX Applications
There are a lot of ON Semiconductor 74VHC595MTCX Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Sequence generator
- Data manipulation
- Data Format Converters
- Data Processors
- Generate time delay toward digital circuits
- Serial-to-parallel data conversion
- Cache memory in CPU
- temporary data storage
- ROM Chips