74VHC574FT
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74VHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 115MHz |
| Family | AHC/VHC/H/U/V |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
74VHC574FT Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74VHCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 115MHz. There are 1 elements in it. During its operation, it consumes 4μA quiescent energy. A total of 20 terminations have been made. A voltage of 5V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of AHC/VHC/H/U/V. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 ports embedded in the flip flops.
74VHC574FT Features
Tape & Reel (TR) package
74VHC series
74VHC574FT Applications
There are a lot of Toshiba Semiconductor and Storage 74VHC574FT Flip Flops applications.
- Clock pulse
- Frequency Dividers
- Shift Registers
- Automotive
- Balanced 24 mA output drivers
- Synchronous counter
- Buffered Clock
- Balanced Propagation Delays
- Frequency Divider circuits
- Reduced system switching noise